Principle of the ABISOFIX Wire Stripper
ABISOFIX Works at low voltage
(long durability, electrically harmless) and is connected
to the mains through an infinitely adjustable power pack.
Three hardened metal blades of the stripper form a funnel.
These will close an the wire from the largest to the smallest
diameter, as the rotary speed increases. The magnet wire is
fed between the blades to the required depth, the Start button
is pushed and the stripper slowly drawn away from the wire.
Due to a smooth start mechanism, the blades do not close jerkily
but nestle gently against the material tobe stripped. Only
then is the necessary stripping pressure applied. Due to an
infinitely adjustable rotary speed the blades may close to
any specific required diameter.
For example a thin layer of enamel can be removed from a magnet
wire without damaging the copper. The result is a neatly stripped
copper wire. Turn off the machine and the ABISOFIX will stop
automatically ready for the next job. According to the combination
of materials to be stripped it is possible to preset the correct
working speed at the power pack. With all additional tools,
the working method is identical.